Hudson Power Steering Pulley

longlivelance

My power steering pulley in my 52 Hornet was damaged. Is there a replacement part number I can use or does anyone have one for sale or know where I can get one?

photo for reference.

onerare39

Contact these folks to see if they can source a pulley for you.

https://www.larescorp.com/select/Hudson/Hornet/1954/ALL

Don't know what the damage is, maybe it could be welded and/or trued up in a lathe.

Hope this helps.

longlivelance

Thank you! I’ll check them out. It’s not cracked and the bore/shaft area is all fine. The damage is just the outer lips where the belt sits.

I'm going to take it to a few local machine shops and see if any of them can repair it.

longlivelance

Welp, the machine shop got it much closer. But not perfect. Hoping it will be usable like this.

Ill check with Lares as well next

onerare39

I would have expected them to have done a better job than that. Maybe finesse it with a small Crescent wrench on the lips of the pulley. Give it a try as is and hopefully it won't throw the belt off but I would still try to locate a better one. Did you contact Wildrick Restoration to see if they had one?

longlivelance

Not yet. I wanted to see if I could get mine fixed first. That’s my next step to start reaching out to Lares, WRP, and maybe seeing if I can find another shop to give a go on the one I have.