Needs parts? We May Have them...

edited June 2016 in Parts & Pieces Posts: 37
We bought a large lot of spare parts with our '53 Hornet. The Gentleman we bought the car from had this one and at least two other Hudsons at one time. I think he may have had a Commodore 8 and maybe a Jet? Not 100% sure, but there is a Jet windshield amongst the collection of parts. We really haven't been through and sorted all of these parts yet. And, as Hudson Newbies, we probably wouldn't be able to identify anything that didn't fit our Hornet. Since we close to Chattanooga, and being on I24 we may possibly on the way for some, we thought we would post some pictures. If you see something you might need or want and care to make the drive from Chattanooga, let us know and we can roll open the storage so you can look around. Make us a fair offer and the parts you need are yours. Let us know if you see something of interest.

shane


IMG_7994.JPG
4032 x 3024 - 3M
IMG_7985.JPG
4032 x 3024 - 2M
IMG_7986.JPG
4032 x 3024 - 3M
IMG_7987.JPG
4032 x 3024 - 2M
IMG_7988.JPG
4032 x 3024 - 3M
IMG_7989.JPG
4032 x 3024 - 3M
IMG_7990.JPG
4032 x 3024 - 2M
IMG_7991.JPG
4032 x 3024 - 3M
IMG_7992.JPG
4032 x 3024 - 2M
IMG_7995.JPG
4032 x 3024 - 2M
IMG_7996.JPG
4032 x 3024 - 2M

Comments

  • 33kc198933kc1989 Senior Contributor
    Posts: 179
    Looking for door guide like this. Hole centers is 1.275. Thanks
    image.jpg
    1536 x 2048 - 455K
    image.jpg
    1536 x 2048 - 402K
  • Ric West INRic West IN Senior Contributor
    Posts: 336
    33kc,    Dug through my stuff and found one.  This came from a 1932 Hudson parts car that I parted out in 1970.   Checked with my 33 Terraplane conv. and it is identical. If you want it , $5.00 plus postage.

    Call me with your contact info:    six-one - six-677-three-7-two-0.

    Fred
  • Nevada HudsonNevada Hudson Senior Contributor
    Posts: 1,230
    Looking for a tinted jet windshield with no chips or cracks.
  • airbrushguyairbrushguy Member
    Posts: 242
    Need the long stainless steel trim piece from the bottom of a '49 Super Six 4door
    Can measure if you think you might have.
    Thanks
  • Posts: 37
    33kc, I'm glad Ric West was able to help you out. I haven't seen any of those door latches in this lot. I have several that will fit our '53 (and maybe other stepdowns).

    Nevada Hudson, I can't recall the condition of the Jet windshield. I'll try to go to the storage unit, pull it out and photograph it for you tomorrow.

    Airbrushguy, we have a ton of chrome and stainless. If you send me a dimension, I'll see if we have anything close and photograph it for you.

    It's storming here tonight, so it will have to be tomorrow afternoon before  can get up there.

    thanks,
    shane
  • Posts: 37
    I'm in need of horn contact button, spring, and cup for our Hornet. So I'm open to trades or items you may be interested, too. Or if you have an extra one laying about, let me know what you are asking for it in cash, too.

    Thanks,
    shane
  • Posts: 37
    Nevada Hudson, I have this Jet windshield. It is marked as being from a '53. It isn't tinted (although it is quite dirty). I didn't see any chips, cracks or significant scratches through the dirt.

    shane
    IMG_8027[1].JPG
    4032 x 3024 - 3M
    IMG_8029[1].JPG
    4032 x 3024 - 4M
    IMG_8028[1].JPG
    4032 x 3024 - 3M
  • segajeepsegajeep Senior Contributor
    Posts: 78
    looking for wheel cylinders and brake shoes.
  • QuadsterQuadster Expert Adviser
    Posts: 57
    segajeep said:
    looking for wheel cylinders and brake shoes.
    Why mess around with used brake parts when everything you need is here
    for short money!!
  • airbrushguyairbrushguy Member
    Posts: 242
    Any interior door handles? Thanks
  • J LombardJ Lombard Member
    Posts: 136
    Shane:
    Do you have a phone contact? You can private message me.

    regards

    J Lombard


  • ByronByron Member
    Posts: 16
    Looking for the round coil springs used in the hood support posts for my '46 bigboy PU.  I understand that there is a fellow that had some made if you do not have a couple.  Also need cowl fresh air door. Please respond, with any information to Byron Hight  wacoykc@hotmail.com   THANKS
  • 52hudsonman52hudsonman Member
    Posts: 11
    any 52 front arm rest

  • J LombardJ Lombard Member
    Posts: 136
    Shane

    Do you have door panel for '53 4dr Hornet?


    regards


    J
Sign In or Register to comment.