1929 Essex rumble step wanted

rusty_apache
rusty_apache Member
in Parts & Pieces
I need the bracketry as well. 
Also looking to buy loose assorted Hudson nuts and bolts, hardware. 

Comments

  • ESSX28-1
    ESSX28-1 Senior Contributor
    Do you want the lower step or the one  mounted on the rear mud guard?
  • rusty_apache
    rusty_apache Member
    I want the elusive lower step and bracketry. 
  • ESSX28-1
    ESSX28-1 Senior Contributor
    We had 4 lower steps sand cast copied from a borrowed original at I think at about $30.00 each. the bracketry (support stem) we made at an engineering firm & cost rather more. This was some years ago & in New Zealand  but hopefully the info may be useful.
    Be aware that the stem (bracketry) are mirror images between each side.
  • rusty_apache
    rusty_apache Member
    ESSX28-1 said:
    We had 4 lower steps sand cast copied from a borrowed original at I think at about $30.00 each. the bracketry (support stem) we made at an engineering firm & cost rather more. This was some years ago & in New Zealand  but hopefully the info may be useful.
    Be aware that the stem (bracketry) are mirror images between each side.
    Thanks for the information. I’m probably going to just wait for an old one to eventually turn up, if ever. 
    I’m considering myself lucky for finding complete  rumble seat cushions!

Categories

In this Discussion