Hudson 397093 intake manifold

dnaill
dnaill Member
in Parts & Pieces
Greetings to All,
I am cleaning out an old farm shop in Maryland and have discovered an intake manifold with two single barrel carburetors.  Hudson 397093 is in the casting but have no more details. I would like to see this go to a good home and be appreciated.
David 

Comments

  • hudsonjet54
    hudsonjet54 Member
    Got pics

  • 7XPacemaker
    7XPacemaker Senior Contributor

    Where are you in Maryland?


  • dnaill
    dnaill Member
    New Windsor 
  • dnaill
    dnaill Member

    This wonderful relic has stirred much interest from multiple sources, so I will let the marketplace sort it out.

    It is on eBay : http://ebay.us/3xIQgO?cmpnId=5338273189


  • bull_islander
    bull_islander Expert Adviser
    wow, looks like it was literally buried in the barn
  • 54coupe
    54coupe Member
    So the part number says 307093. It will fit all six cylinder Hudson blocks from 48-56 except the 202 cubic inch engine used from 53 -56. It had the external balance tube, so it was not in a 55 or 56 Hudson. The carb. base bolt spacing would need to be checked to see if it's Wasp or Hornet, or someone with a parts book look up the correct number and see the application.
  • dave11
    dave11 Expert Adviser

    Is this the correct manifold for a 52 308 ?

     my master parts catalogue lists a 307183 as the correct manifold

    Dave

  • Ric West IN
    Ric West IN Senior Contributor
    Casting numbers and Hudson part numbers are rarely the same,   Twin H Manifold for the 262 has the same casting number, difference is in the carbs and carb mounting spacing.
  • 54coupe
    54coupe Member
    dave11 said:

    Is this the correct manifold for a 52 308 ?

     my master parts catalogue lists a 307183 as the correct manifold

    Dave

    It will bolt up to the block.

Categories

In this Discussion