1936 Terraplane hood trim needed

Rocket
Rocket Senior Contributor
I am looking for the chrome strip that goes down the center on top of the hood for my 36 Terraplane

Comments

  • barrysweet52
    barrysweet52 Expert Adviser
    There have been previous discussion re this strip. A Mack truck I believe was similar and MGs. A "search" should find it. 
  • bob ward
    bob ward Senior Contributor
    Wildrick have someone who can make them for 34/5 H&T, I doubt that a 36 will have much of a different cross section.
  • philster
    philster Expert Adviser
    1934/5 & 6 Hudson & Terraplane are all the same except for the length.  Mac "B" model truck bonnet hinge (part number 4QM12P5) are becoming harder to locate, at least in Aust that is.  If you find one, it needs to be "spread" to suit - I have the Mac truck ones on my 1934/5 & 6 H & T vehicles.  Don't know anything about the MG ones that Barry mentions.
  • Rocket
    Rocket Senior Contributor
    I found mine I thought I had lost it thanks for the post.
  • barrysweet52
    barrysweet52 Expert Adviser
    Philster, How did you spread the P23 hinge?
  • jjbubaboy
    jjbubaboy Senior Contributor
    Dr. Doug has the hood hinge listed at
    wrphet.com
    Jeff

    1933 - 37 Hudson and Terraplane

     

    Hood Hinge Stainless Steel 40" Long Cut to Fit

     

    $80.00  PN434