IAT 4009B Distributor 12 volt condenser part number

BitburgerBitburger Posts: 136Member
in Parts & Pieces
I'm switching over to 12 volt and understand that if staying with my IAT 4009B distributor that the "6 volt" points, cap and rotor remain but the condenser must be changed to 12 volt.  So, can anyone please provide a part number/application for the correct 12 volt condenser?  

Comments

  • GeoffGeoff Posts: 4,714Senior Contributor
    Condensor is not voltage rated, only microfarads.  Must be in range .18 to .22 uf. 
    If you're stuck in a hole, stop digging.
  • BitburgerBitburger Posts: 136Member
    Geoff said:
    Condensor is not voltage rated, only microfarads.  Must be in range .18 to .22 uf. 
    Ok, so does that mean the OEM condenser (AL 869 I think) still works or is a different one required when switching to 12 volts. 
  • GeoffGeoff Posts: 4,714Senior Contributor
    As I said, voltage is immaterial. Just use the same one. 
    If you're stuck in a hole, stop digging.
  • BitburgerBitburger Posts: 136Member
    Geoff said:
    As I said, voltage is immaterial. Just use the same one. 
    Thanks
Sign In or Register to comment.