More on the Oil Pump Spring Warning

John posted this warning:



<<All Super Six owners make sure you check the plunger return spring in your

oil pump. Last year, a friend, had just had all his worn rods replaced and

within five miles after leaving the workshop, he had run a bearing. After

removing the sump, he found very little oil in the number one trough. Upon

removal of the oil pump he found the spring in three pieces, he could not

believe he had not noticed the pressure drop on the gauge. This tapered

spring wears on the inside coils. If the spring has any wear, replace it.

We had a batch of springs made her from the members of our local club.

So take a few minutes and check your oil pump spring.>>



Can you tell us how to check the spring? I would certainly like to check

the one on the '29! Your local club repoped the springs -- are any still

available, and would they consider selling a couple to Super Six enthusiasts

outside of the club? I am interested.



Paul O'Neil, Hudson29@aol.com

NEW email list for Hudson Super Six Cars, 1916-1929!

http://www.onelist.com/subscribe/HudsonSuperSix16-29

1926 Hudson Anderson Bodied Coupe

1926 Hudson Parts Car "The Grapes Of Wrath"

1928 Hudson Roadster Project

1929 Hudson Town Sedan

1939 Cadillac Coupe (How'd that get in there?)

Fullerton, California USA

AEROMARK - Need Rubber Stamps or Signs? See:

http://www.aeromark.net
This discussion has been closed.