1930 Essex Sedan Wish List of needed parts...

GumpY159GumpY159 Posts: 19Member
I could use a set of exterior doorhandles or at the very minimum the right hand passenger door Handle with a lock.  Keyed would be a bonus but mostly I need the complete cylinder lock.
A working amp gauge or info on where to get one rebuilt.
Radiator shutters pull handle
Rear tail light lens
Any usable parts for a Marvel VE carb
Any dimensions or info on the rear widow pull down shade.  
A picture of the pinstripes on the wooden Artillery wheels

Thank You in advance for your help...

Comments

  • GeoffGeoff Posts: 4,130Senior Contributor
    I have a shutter handle and latch mechanism. 
  • HansHans Posts: 149Senior Contributor
    Please look at the side of carb for numbers in this format 10-? ? ?
    I have seen VE float bowl covers on other Marvel carbs.

    Marvel VE's do have differences, in Accelerator pump plunger and others.
    VE's have two jets like the '29's.  But '31's have 3 jets.

    I have just shipped a Marvel carb to fit a '29 Essex to a gentleman who origionally thought he needed a carb for a 1930 car, his title says '30 his car is a '29.
    \////////////////
    What parts do you think you need?

    If my land line is working you can try calling 517-2 six  three  -   3  six six  6

  • faustmbfaustmb Posts: 1,229Senior Contributor
    Send me an email , I probably have all the parts you are asking about including a rear window shade, HETorphanautomill@gmail.com,  drop the HET
  • rusty_apacherusty_apache Posts: 178Member
    A picture of the pinstripes on the wooden Artillery wheels.


  • VicTor ZVicTor Z Posts: 728Senior Contributor
    Rear tail light lens  ? This light lens came from my friends estate, he had a '31 Essex. Not sure of year and for what vehicle. Help identify and make offer.  VicTor thez@verizon.net 
  • GumpY159GumpY159 Posts: 19Member
    Thank you for the pinstripe dimensions,  now I have something to work with...
  • rusty_apacherusty_apache Posts: 178Member
    GumpY159 said:
    Thank you for the pinstripe dimensions,  now I have something to work with...
    You’re quite welcome.
    Nice to see that you are looking to accurately restore your wheels!
Sign In or Register to comment.