Gasket for fuel pump bowl

does anyone know of a good part number for a fuel pump bowl gasket? Cork material and about 2.7 inch o.d. 1950 hudson super six. 

Comments

  • JasonNC
    JasonNC Expert Adviser
    I always bought the cork material from NAPA and made my own.  
  • bob ward
    bob ward Senior Contributor
    Cut one from a fresh sheet of cork, its available in different thicknesses. If you were to find a fuel pump bowl gasket odds are it will be decades old and shrunken.
  • Good idea. Thanks!
  • What thickness, will 1/8" be too thick or should I go with 1/16"?
  • I had a surprise to find most art supplies shop have small amounts of Cork sheets in many thickness just hanging in packs of a4
    (just incase you find a auto store that stocks just 2 thickness) 
  • bob ward
    bob ward Senior Contributor
    I'd imagine 1/16" would be adequate. 
  • BigSky
    BigSky Senior Contributor
    I use 1/16” on my 37 Hudson’s.
  • Thanks for responding all!